RANGER CREW RUNNING BOARDS INSTALL INSTRUCTIONS
STEP.1- Drill out with 1 3/4in hole-saw bit 8 (4 per side) mounting points. Holes are pre marked from factory.
Step.2- Drill out mounting hole with 1/2in drill bit
Step.3- remove front and rear skid plate
Step.4- Hold up running board and begin hand tightening hardware. (Bolt,Lock Washer, Flat Washer). We do recommend putting red loctite on these bolts
Step.5- Once all bolts are threaded in, tighten down
Step.6- Reinstall skid plate
Step.7- Enjoy